Sub-Zero Code 10 1 00: Refrigerator Cabinet Thermistor Open

What Code 10 1 00 Means

Thermistor / Temperature Sensor Fault

Refrigerator Cabinet Thermistor Open. Check ohms and verify temperature readings.

Thermistor codes mean the control board is getting a reading from a temperature sensor that doesn’t make sense — open, shorted, or swinging erratically — rather than a steady, believable number.

01
The thermistor sensor itself has failed and is reading open or shorted
02
A connector at the sensor has corroded or worked loose over time
03
Moisture has gotten into a sensor connection point
04
Wiring between the sensor and control board has been pinched, kinked, or chewed

Safe Checks You Can Do First

Before you call.

A few things worth checking yourself — none of it requires opening the sealed system or working inside the control panel.

01
Power-cycle the unit at the breaker for about 60 seconds and see if the code returns
02
Confirm nothing is blocking the vents near where the sensor sits
03
Note how often the code returns and whether it lines up with a specific cycle, like defrost or a door opening

When to Call a Professional

Confirming a thermistor fault means testing the sensor’s resistance against Sub-Zero’s temperature chart and checking the wiring for continuity — without that step, the wrong sensor gets ordered more often than not.

$99Diagnostic, Waived w/ Repair

Up to 365Days Warranty

Same-DayAppointments

Call (949) 848-3329 Sub-Zero Refrigerator Repair

FAQ

Code 10 1 00, answered.

What does Sub-Zero code 10 1 00 mean on my refrigerator?

Code 10 1 00 means: Refrigerator Cabinet Thermistor Open. Check ohms and verify temperature readings. It falls under thermistor / temperature sensor fault — Thermistor codes mean the control board is getting a reading from a temperature sensor that doesn’t make sense — open, shorted, or swinging erratically — rather than a steady, believable number.

Can a thermistor fault clear itself?

Sometimes, if it was caused by a brief connection issue that reseated itself. If it keeps coming back, that points to a genuinely failed sensor rather than a one-time glitch.

Is it safe to keep using the unit with a thermistor code active?

Usually yes in the short term if the unit still seems to be cooling normally, but have it checked soon — a bad sensor can eventually cause the control board to make the wrong cooling decisions.

Can I test the thermistor myself with a multimeter?

If you have one and know the resistance-to-temperature chart for the specific sensor, yes — but ordering the wrong replacement without that data is a common and avoidable expense.

Does a thermistor fault mean I need a new control board?

No — thermistors are separately replaceable sensors, not part of the board itself, so a confirmed sensor fault is usually a simpler and less expensive fix than a board fault.

How long does a thermistor replacement typically take?

Once diagnosed, replacing a thermistor is usually a same-visit repair.

Sub-Zero Code 10 1 00: Refrigerator Cabinet Thermistor Open

The fix points to the temperature sensor (thermistor) or its wiring harness. Confirming a thermistor fault means testing the sensor’s resistance against Sub-Zero’s temperature chart and checking the wiring for continuity — without that step, the wrong sensor gets ordered more often than not.

Thermistor / Temperature Sensor Fault

What you might notice.

Before you call.

Confirming a thermistor fault means testing the sensor’s resistance against Sub-Zero’s temperature chart and checking the wiring for continuity — without that step, the wrong sensor gets ordered more often than not.

Other Thermistor / Temperature Sensor Fault codes.

Code 10 1 00, answered.

Need this code diagnosed?